Repairs to uPVC Windows
uPVC windows are an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. Unlike timber and aluminium, they are not susceptible to corrosion or rot.
It is important to clean and oil UPVC windows and doors on a regular basis. This will help avoid unnecessary repair costs as well as improve energy efficiency.
1. Broken Glass
The damaged glass in your windows could cause severe damage to your home and even be fatal. It is crucial to take the time to ensure that you are doing everything you can to ensure that your windows are in good shape.
Single-pane windows are relatively simple to replace, and they will usually fit into the old frames very easily. However If you have double-pane windows that are secured by internal beading, it'll be more difficult to take out the existing panes and install new ones. In this instance it is essential to purchase plastic spacers in order to make sure that the new pane fits into the window frame.
If you're planning to try to remove the window panes by yourself it is important to wear appropriate safety gear that includes gloves with a thick layer of material and protective eyewear. It is also a good idea to lay down a dropcloth before you start working on the glass, so that any shards fall onto the fabric instead of onto the floor where they can be trodden under and cause further damage.
After the glass has been removed from the window, it's best to seal the gap with some clear packaging tape or duct tape to stop water and drafts from getting into the property until a professional is able to come out and fix the window. This will also act as a barrier, deterring any intruders from gaining entry to your home. If the gap is large, you might think about an alarm door that comes with an integrated window, as it offers the best of both worlds.
2. Sagging
uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash windows. In time, they could develop a variety of issues that include sagging. A window that is sagging can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to lose its shape, it's important to act quickly to prevent the problem from worsening.
To fix a sagging window you can try repositioning the hinges. First, you'll need to open the windows to get at the frame. Then, using an screwdriver, take off the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after having moved your hinges. If you are happy with the fit of your window, you can tighten screws to secure them in the right position.
If you are unable to move the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity over time, which causes them to lose their tightness. It is crucial to replace your seal as soon as you can to ensure that your uPVC window waterproof and draughtproof.
uPVC handles may also become loose. The majority of the time this is due to screws that have become loose over time. However, it could occur because the handle mechanism has been worn out. It's relatively easy to fix a loose uPVC handle. First, you'll need close your window and do an initial test to ensure that it fits. The corner joints of the sash need to align with the casing joint. If it isn't, you can make use of a screwdriver to loosen the handle and turn the mechanism back into its original position.
3. Water Leaks
It is important to take action if you wake up every morning to find mouldy walls and floors that are wet. The leaks of water from windows do not only lead to the destruction of your home's structure but also hinder your efforts to control the temperature within your home. Most of the time, uPVC window leaks are caused by damaged or website missing sealant.
This is a relatively easy fix that can be done by any skilled DIYer. Depending on the severity of the problem is, the old caulking might need to be removed. It is essential to keep in mind that when it is about uPVC window repairs you should not be tempted to 'over-caulk and then make the area harder to clean and could reduce the efficiency of your energy.
It is important to check that any drainage holes are free of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious cases, you may need to replace the window.
Mold spots and rotted sills are another sign of water leakage. The fungus thrives in humid conditions and can propagate quickly throughout the house.
If the leakage is occurring between the double-glazed window, it is more likely that the problem is with the seal rather than the frame. This can be easily repaired by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.
4. Faulty Hinges
Hinges may be to blame when your uPVC window is difficult to open or if it opens in an ease. They can be easily repaired by any DIYer who is skilled and are usually completed in a matter of minutes.
Like any mechanical component hinges will wear out over time. It's very simple to change a window hinge but it's much easier if someone helps you hold the frame.
Verify that the uPVC hinges are open and closed in the proper direction. You can check this by looking for the arrows on each hinge. This shows which way the window should be opened.
The problem with the hinges on windows could be the result of incorrectly opening the window in a certain way or by improper installation in the click here factory. It is usually possible to fix the issue by sending us a photo through our website and we will be more than happy to give you advice.
It is also crucial to lubricate the hinges regularly. Applying a light engineering lubricant on the hinges is a good way to do this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also decreases the possibility of a window getting stuck and stop corrosion. Ideally, you should do this at least once a year. WD40 and other solvent-based lubricants are not recommended as they can damage the parts of your uPVC window.
5. Draughts
Draughts can be caused by different causes. Firstly the hinges, again because of wear and tear, may become displaced, which will cause gaps to develop where the sash joins the frame. If they are damaged beyond repair, it may be website necessary to get them re-aligned. The interlock, which is located on the hinge of the window, can also become misaligned, again it is possible to just give them a good clean, but in some instances it could be necessary to have these replaced.
The second most frequent reason for draughts is window seals. These can become worn down or damaged over time, and let air escape through the check here gaps. Installing high-quality weatherstripping is a good way to stop draughts. Another alternative is to replace the window with low-emissivity glass, which will help regulate indoor temperatures and will lessen the risk of draughts.
Another, and most effective ways to reduce drafts is to use an draught excluder. These are usually fabric tubes that are filled with some type of filler. They can be placed on the top of your windowsill. These will help to stop cold air from entering and check here keep your home warm and cosy!
Your upvc windows can keep providing excellent insulation and security in your home with regular maintenance and repairs. It is crucial to keep in mind that all windows eventually get worn out and it is more cost-effective to replace them rather than repair them. So, if you're having issues with your upvc windows, it is best to seek professional assistance as soon as you can.